Titespot® Angle Heads | How to Order

Please review the Angle Head sizes and dimensions charts on this page, and generate part numbers using the simple tool below. For tech help or ordering, call us toll free at 1-877-435-8665 (USA), or (513) 723-1772.

Generate Part Number

Part Number:

- - - -

MSD

MTC

MBS

MSD

MTC

MBS

Angle Heads Product Content

Sizes and Dimensions Chart

Titespot Angle Heads Dimensions - English

Head Size	Spindle	L	E	F	G	MBS	MSD	MTC
0	Weldon	2.000	.250	.406	.605	.625	.125	.015
1 D 1 Drilling	Taperlock	3.000	.500	.465	.813	1.000	.115	.125
	El Tool	3.000	.500	.688	.985	1.125	.125	.125
	Weldon	3.000	.500	.500	.813	1.000	.125	.125
1 M 1 Milling	Taperlock	3.000	.375	.625	.938	1.125	.115	.125
	El Tool	3.000	.375	.670	.985	1.125	.125	.125
	ER-8	3.000	.375	1.000	1.312	1.438	.196	.125
	Weldon	3.000	.375	.730	1.045	1.312	.250	.188
2 D 2 Drilling	El Tool	4.000	.625	.720	1.125	1.625	.156	.281
	ER-11	4.000	.625	1.250	1.650	1.875	.275	.140
	Weldon	4.000	.625	.906	1.312	1.500	.312	.125
2 M 2 Milling	El Tool	4.000	.625	.975	1.375	1.750	.156	.281
	ER-11	4.000	.625	1.538	1.938	2.250	.275	.140
	Weldon	4.000	.625	1.100	1.500	1.875	.375	.125
2 TD Hi Torque Drilling	El Tool	3.000	.625	.750	1.094	1.438	.188	.188
	ER-11	3.000	.625	1.200	1.562	2.750	.275	.125
	Weldon	3.000	.625	.856	1.219	1.438	.375	.094
2 TM Hi Torque Milling	El Tool	4.000	.531	.937	1.275	1.500	.188	.05
	ER-11	4.000	.531	1.469	1.812	1.938	.275	.05
	Weldon	4.000	.531	1.100	1.445	1.625	.375	.062
3D 3 Drilling	ER-11	5.000	.688	1.595	2.355	2.875	.275	.390
3 M 3 Milling	ER-16	5.000	.688	1.812	2.625	3.000	.406	.250
3 M 3 Milling	Weldon	5.000	.688	1.353	2.188	2.625	.500	.250

Head Size	Spindle	L	E	F	G	MBS	MSD	MTC
0	Weldon	50.8	6.35	10.312	15.367	15.875	3.175	0.381
1 D 1 Drilling	Taperlock	76.2	12.7	11.8	20.7	25.4	2.9	3.2
	El Tool	76.2	12.7	17.5	25.0	28.6	3.3	2.4
	Weldon	76.2	12.7	12.7	20.7	25.4	3.3	3.2
1 M 1 Milling	Taperlock	76.2	9.5	15.9	23.8	28.6	2.9	3.2
	El Tool	76.2	9.5	19.0	25.0	28.6	3.3	3.2
	ER-8	76.2	9.5	25.4	33.3	36.5	5.0	3.2
	Weldon	76.2	9.5	18.5	26.5	33.3	6.0	4.8
2 D 2 Drilling	El Tool	101.6	15.9	18.3	28.6	41.3	4.0	7.1
	ER-11	101.6	15.9	31.8	41.9	47.6	7.0	3.6
	Weldon	101.6	15.9	23.0	33.3	38.1	8.0	3.2
2 M 2 Milling	El Tool	101.6	15.9	24.8	34.9	44.5	4.0	7.1
	ER-11	101.6	15.9	39.0	49.2	57.2	7.0	3.6
	Weldon	101.6	15.9	27.9	38.1	47.6	9.5	3.2
2 TD Hi Torque Drilling	El Tool	101.6	15.9	19.05	27.78	36.52	4.77	4.77
	ER-11	101.6	15.9	30.48	39.67	44.45	7.0	3.18
	Weldon	101.6	15.9	21.75	31.00	36.52	10.0	2.40
2 TM Hi Torque Milling	El Tool	101.6	13.5	23.80	32.38	38.10	4.77	1.25
	ER-11	101.6	13.5	37.30	46.00	49.23	7.0	1.25
	Weldon	101.6	13.5	28.00	36.70	41.27	10.00	1.60
3D 3 Drilling	ER-11	127.0	17.5	40.5	34.4	73.0	7.0	9.9
3 M 3 Milling	ER-16	127.0	17.5	46.0	66.7	76.2	10.0	6.4
3 M 3 Milling	Weldon	127.0	17.5	34.4	55.6	66.7	12.0	6.4

*MBS = The minimum bore size the tool will enter
*MSD = The maximum shank the tool will clamp. The tool may be larger but the shank size can not exceed this number.
*MTC = The maximum length the tool can protrude and still allow the head to enter the minimum bore size. As the bore radius increases the maximum tool clearance will increase by an equal amount.

Sizes and Dimensions Chart

Titespot Angle Heads Shank Dimensions - English
Notes:

M style milling heads are recommended for heavier duty milling and drilling applications. They incorporate two preloaded angular contact bearings on the front of the spindle for improved performance and durability in side load applications. D style drilling heads are smaller and may fit where M style heads will not. M style heads are the preferred choice where space permits. T style heads incorporate a miter gear set with a 2:1 ratio. This results in twice the torque at half the speed for tougher materials or when lower surface feet and higher torque are desired.
Taperlock and Eltool Collet spindles are proprietary spindles designed to minimize the profile of the angle heads.