Call Us: 877-4ELTOOL

Made in USA

Coolant Driven Right Angle Heads
Live Lathe Tools
Spindle Speeders
Key Cutters

Can I Get Something Special Made

Home » Galleries » Can I Get Something Special Made

Can I Get Something Special Made

A standard straight shank Eltool head can be mounted in an endmill holder.

A standard straight shank Eltool head can be mounted in an endmill holder.

It's an inline spindle speeder on an HSK63 shank

The Size 4 head uses the inline bearing spindle speeder package but the motor bore is 90 degrees to the shank.

Size 3M head with a special spade drill spindle.

ER-16 collet arbor

Spade Drill Spinder

Any Eltool standard head can be mounted on the Size 4 shank.

A Size 2D with an ER-11 collet mounted at 45 degrees on a size 4 head.

A BMT60 Live tool module with an 8 inch long 3M head. Ok pretty much off the shelf stuff be we think it's special.

A size 1M head with a .250 (E) dimension. That's the distance from the end of the head to the center of the spindle. We like to call it the Minie. Or 1ME

A peek at the 5:1 planetary gearbox.

An inline head built into a turret block for an Okuma LB15.

A Size 2M head with a .465 cubic inch motor.

A Size 3M with ER-16 Collet with an ER-8 back collet.

Turret blocks used for live tools with JW Done deburring tools

APKT-1003 Screw in ER-16 End mill.

New Size 0 head machines in bores down to 5/8 inch.

Special 8" long 3M heads

Contact Eltool Customer Support

For tech help or ordering assistance, call us toll free at 1-877-435-8665 (USA).